7250 SW 39th Terrace, Miami, FL 33155
Licensed & Insured · South Florida
Bigfoot Windows and Roofing
Home – Roofing – Shingle Roofing in Miami to Protect Your Home
Shingle Roofing · South Florida

Shingle Roofing
Built for Florida Storms.

Affordable, storm-ready shingle roofing systems for Miami-Dade, Broward, and Palm Beach homeowners — with permit-ready documentation, clean communication, and no-pressure guidance.

A shingle roof is not just shingles.

01 · Underlayment The secondary water barrier beneath the roof surface.
02 · Starter Shingles Critical edge protection against wind uplift.
03 · Ventilation Helps manage attic heat, moisture, and long-term roof performance.
04 · Flashing Protects roof transitions, walls, valleys, and penetrations.
Licensed & Insured
Permit-Ready Process
Miami-Dade · Broward · Palm Beach
Clear Written Estimates
Clean Jobsite Standards
Licensed & Insured
Permit-Ready Process
Miami-Dade · Broward · Palm Beach
Clear Written Estimates
Clean Jobsite Standards

Roof Condition Check

Not sure if your roof needs repair or replacement?

Start with what you are seeing. Shingle roofing problems can look small from the ground, but the system underneath may tell a different story.

What are you noticing?

Not sure what your roof needs?

Choose the path that fits where you are right now. You can estimate online or book a roof assessment with Bigfoot.

Start My Roofing Estimator →

Best if you want a faster starting point before speaking with the team.

Book a Roof Assessment →

Best if you already see roof issues, leaks, aging shingles, or storm-related concerns.

The System Behind the Shingles

Click the roof details that protect your home.

A shingle roof performs as a system. The parts you cannot see from the street are often the parts that matter most.

Selected Detail

Underlayment

The secondary water barrier beneath the shingles. It helps protect your home if water gets past the roof surface.

Get My Roof Options
Darryl Rosenbaum
Reviewed By Darryl Rosenbaum
Roofing Expertise

Reviewed by a licensed South Florida contractor.

This shingle roofing guide was reviewed with Bigfoot’s roofing standards in mind: proper installation, permitting, storm-season readiness, clean job sites and clear communication for South Florida homeowners.

Licensed Roofing Contractor Licensed General Contractor Licensed Residential Contractor Serving Miami-Dade, Broward & Palm Beach
Shingle Roofing Service Areas

Shingle roofing across Miami, Broward & Palm Beach.

Asphalt shingle roofing is a practical option for many South Florida homes. Bigfoot helps homeowners plan shingle roof repair, replacement and installation with local code, storm season and budget in mind.

Miami-Dade

Shingle Roofing in Miami

Shingle roof installation, replacement and repair for Miami homeowners looking for practical storm-season roofing support.

Miami-Dade

Shingle Roofing in Pinecrest

Roof replacement planning for homeowners dealing with aging shingles, leaks, wind wear or insurance concerns.

Miami-Dade

Shingle Roofing in Palmetto Bay

Shingle roofing support for homes exposed to South Florida heat, rain, humidity and seasonal storms.

Miami-Dade

Shingle Roofing in Cutler Bay

Roof repair and replacement options for homeowners who need clear pricing and a clean process.

Broward

Shingle Roofing in Broward

Serving Broward homeowners with licensed shingle roofing installation, replacement and repair support.

Palm Beach

Shingle Roofing in Palm Beach

Helping Palm Beach homeowners evaluate roof condition, shingle replacement options and next steps.

Before Replacing Your Roof

Three mistakes to avoid when replacing a shingle roof.

01

Layering over an existing roof to save money.

Do not assume that adding another layer is an approved shortcut. Whether a roof recover is appropriate depends on the existing roof, deck condition, proposed system, product instructions, and applicable requirements. Removing the existing covering allows the deck to be inspected for hidden damage. Ask your contractor to explain the proposed approach and any warranty limitations before you sign.

02

Choosing a contractor by price without verifying the permit.

A lower price should not mean skipping required permits or inspections. Before work begins, confirm which building department handles your address, who will obtain the roofing permit, and how you can check its status. Ask for the permit number and keep the final inspection and closeout records with your home's documents.

03

Ignoring attic ventilation when replacing the roof.

A shingle roof replacement is the right time to evaluate attic ventilation. In a vented attic, inadequate intake or exhaust can allow excess heat and moisture to build up, potentially affecting roofing materials and structural components. Ask your contractor to assess the existing attic design and explain which ventilation approach fits your home and roofing system.

From Estimate to Final Walkthrough

A clearer roofing process from day one.

Click through the process to see how a shingle roofing project moves from first step to final review.

Step 01

Tell us about your roof.

Start with the roofing estimator or book a roof assessment. We gather the basics: roof age, visible issues, urgency, and what you are trying to solve.

Book a Roof Assessment

Permits & Inspections

Permitting a shingle roof in Miami-Dade and Broward — what to expect.

Permit timelines in South Florida vary by county, jurisdiction, and current department workload. Here is a general outline of the process.

  1. Confirm the jurisdiction and submit the application.

    Your contractor confirms which building department handles your address and submits the roofing permit application, scope of work, applicable product approvals, and required supporting documents.

  2. Complete the building department review.

    The building department reviews the application and may request corrections or additional information. Review time depends on the jurisdiction, project details, and completeness of the submission.

  3. Obtain the permit before starting permitted work.

    Once the permit is issued, your contractor coordinates the work and required inspections. Ask for the permit number so you can follow its status through the applicable building department.

  4. Complete the required inspections.

    Inspections take place at the stages required for your permit. Your contractor should explain those milestones and coordinate inspections before work that needs to be inspected is covered.

  5. Confirm final approval and permit closeout.

    After the required inspections and any remaining closeout requirements are completed, confirm the permit's final status with the building department. Ask your contractor for the final inspection record and permit closeout documentation.

Your address determines the process. Properties within Miami-Dade and Broward may fall under a municipal building department or county jurisdiction. Confirm the department responsible for your property rather than assuming one county-wide process applies to every home.

Before You Sign

Five questions to ask any roofing contractor before signing.

  1. Is the shingle you're proposing NOA-approved for HVHZ?

    Ask for the NOA number and verify it at the Miami-Dade product approval search before the contract is signed.

  2. Will you pull the permit, and can I track it through the county portal?

    A licensed contractor should pull the permit in their name. If they ask you to pull it, that shifts liability to you.

  3. What underlayment system are you installing, and why?

    The answer should reference the slope of the roof, product specifications, and HVHZ requirements — not just "the standard one."

  4. How will you handle the deck inspection, and what happens if you find damaged sheathing?

    Get the process and pricing in writing before tear-off begins.

  5. Who handles the final inspection, and will I receive documentation when it's closed?

    You are entitled to a copy of the closed permit and inspection record — it is part of your home's permanent building record.

Florida wind performance and insurance documentation

Built for Florida wind loads — and your insurance file.

Your shingle roofing system is selected and installed according to the applicable Florida Building Code, permit and wind-load requirements for your property.

Built for Florida Wind Loads

The approved roof assembly, fastening requirements and installation details are reviewed according to the property, permit and applicable code requirements.

  • Approved shingle roofing system reviewed
  • Wind-uplift and fastening requirements verified
  • Roof deck conditions documented during the project
  • Permit and required inspections coordinated

Wind-Mitigation Documentation

A properly installed, code-compliant roof may help support eligibility for wind-mitigation insurance credits under Florida Statute 627.0629.

  • Ask about a wind-mitigation inspection after completion
  • Keep permits, final inspections and product documents
  • Provide available documentation to your inspector or insurer
  • Confirm final eligibility directly with your insurance carrier
Insurance savings are not guaranteed. Eligibility and discount amounts depend on the completed inspection, policy, insurer and qualifying features documented at the property.

Compare Your Roofing Options

Is shingle roofing the right fit?

Not every home needs the same roofing system. Compare the most common options before making a decision.

Selected Option

Shingle Roofing

A practical, budget-friendly roofing option for many South Florida homeowners who want a clean look, faster project planning, and reliable system performance when installed correctly.

Budget-friendly replacement option
Clean architectural look
Good fit for many residential homes
Compare My Roof Options
Florida Roofing Planning

Not sure if your roof is ready for another season?

Get a clearer understanding of your roof condition before making a repair or replacement decision.

Shingle Roofing FAQs

Questions South Florida homeowners ask before replacing a shingle roof.

Clear answers about cost, timing, permits, repairs, and what really matters in a shingle roofing system.

How long does a shingle roof last in South Florida?

It depends on the roof system, ventilation, installation quality, weather exposure, and maintenance. In South Florida, heat, storms, rain, and wind make proper installation details especially important.

How much does a shingle roof cost in Miami?

Pricing depends on roof size, pitch, layers, decking condition, materials, permit requirements, and installation complexity. The roofing estimator is the best first step to get a more relevant starting point.

Are shingles good for hurricane-prone areas?

Shingle roofing can be a good option when the full system is installed correctly. Starter shingles, fastening, edges, underlayment, flashing, and code-compliant installation all matter.

Should I repair or replace my shingle roof?

That depends on the age of the roof, leak history, condition of the shingles, decking, underlayment, and whether the issue is isolated or part of a larger system problem.

Do you handle roofing permits?

Yes. Bigfoot helps coordinate the permit process and required inspections for roofing projects across South Florida.

Can I install a metal roof over existing shingles to avoid a tear-off?

In some cases, a roof recover may be possible, but it is not an automatic option. The existing roof and deck, proposed metal system, attachment method, applicable product approvals, and local requirements must be evaluated. Ask your contractor to confirm whether the proposed assembly is approved for your property and how the deck condition will be assessed before choosing this approach.

How does algae and moss affect a shingle roof in South Florida?

Algae can cause dark staining, while moss can hold moisture and affect the shingles. Have a roofing professional identify the growth and follow the shingle manufacturer's cleaning instructions. Avoid pressure washing: it can dislodge protective granules and damage shingles. Ask about algae-resistant shingle options when planning a replacement.

What is the difference between a roofing repair and a reroof for permit purposes?

The permit scope depends on the proposed work, existing roof, and requirements of the building department responsible for your address. Do not assume that calling work a "repair" removes permit requirements. Florida's 25% rule also has an important exception for qualifying roofs built, repaired, or replaced in compliance with the 2007 Florida Building Code or a later edition. Ask your contractor to confirm the applicable requirements and document the proposed scope with the building department.

Updated November 2026