Get Your Instant Roofing Estimate
Answer a few quick questions and get a real ballpark for your South Florida roof — before you talk to anyone.
Estimates are approximate ranges based on 2025–2026 South Florida market data. Final pricing depends on roof size, pitch, material, structural conditions, and permit requirements. Request a free on-site estimate for an accurate quote.
Quick Answer: How Much Does a New Roof Cost in South Florida?
Most South Florida homeowners pay between $12,000 and $45,000+ for a full roof replacement, depending on roof size, material, complexity, and code requirements. Asphalt shingle roofs on a standard home typically fall in the $12,000–$22,000 range. Concrete tile roofs generally run $18,000–$35,000. Metal standing-seam roofs range from $25,000–$50,000+. Homes in Miami-Dade’s High Velocity Hurricane Zone (HVHZ) typically pay more due to stricter product approvals, enhanced fastening, and sealed-deck requirements. Actual pricing depends on roof size, pitch, number of existing layers, decking condition, underlayment selection, structural needs, ventilation, permits, and the contractor’s licensing, insurance, and installation standards.These are directional ranges based on 2025–2026 South Florida market conditions — not guaranteed quotes. Every roof is different. Request a free inspection and estimate for pricing specific to your home.
Before you call any roofer
The guide below could save you thousands — or protect you from a bad contract.
Most South Florida homeowners get burned not because they didn’t get enough quotes, but because they didn’t know what to look for inside those quotes. This guide covers the real variables behind every number — so you can compare bids accurately and spot red flags before you sign anything.
What Makes a Roof Replacement More Expensive in South Florida?
Roof replacement is not a commodity with a single price tag. The final number on a legitimate roofing proposal reflects dozens of variables. Understanding these factors helps you compare bids accurately — and avoid the mistake of choosing a quote that looks lower only because it leaves important scope out.Does roof size affect the price?
Larger roofs require more material, more labor, and more time. But size alone doesn’t tell the story. A 2,500-square-foot roof with a simple hip design is a very different project than a 2,500-square-foot roof with multiple valleys, dormers, skylights, penetrations, and changes in direction. Every transition point — hip, valley, ridge, rake, wall intersection — adds labor, flashing, and potential failure points that need proper waterproofing.Does roof pitch or access add to the cost?
Steeper roofs are harder and slower to work on. Anything above a 7:12 pitch typically requires additional safety equipment and staging, which adds cost. Access matters too — if your roof is difficult to reach due to landscaping, fencing, narrow lot lines, or multi-story construction, material delivery and debris removal take longer and may require specialized equipment.How does tear-off and decking condition affect roofing cost?
Florida Building Code generally requires removal of existing roofing materials before installing a new system. If your current roof has two layers of shingles, the tear-off cost increases. More importantly, once the old roof is removed, the condition of the decking underneath is revealed. Rotted, delaminated, or water-damaged plywood or OSB must be replaced before the new roof goes on. Decking repairs can add $2–$5+ per square foot in affected areas, and the extent of the damage is not always visible until tear-off begins. It is also worth noting that the National Roofing Contractors Association (NRCA) no longer recommends oriented strand board (OSB) as a substrate for steep-slope roof systems due to long-term performance concerns — and now recommends thicker plywood sheathing minimums. A quality contractor will discuss decking options with you, not just patch over problems.What are the underlayment and code requirements in South Florida?
Underlayment is the water-resistant barrier installed between the decking and the finished roofing material. In South Florida — especially within the HVHZ zone covering much of Miami-Dade and portions of Broward — code requires specific underlayment products, installation methods, and sealed-deck applications. Enhanced underlayment systems (self-adhered, peel-and-stick) cost more than basic felt but provide significantly better storm protection. The Florida Building Code, 8th Edition sets minimum requirements, but many quality contractors exceed those minimums because code is a floor, not a ceiling.How does material choice affect the price of a new roof?
The roofing material you choose has the single largest impact on price. Architectural asphalt shingles are the most affordable option. Concrete and clay tile cost substantially more but last significantly longer. Standing-seam metal is the premium choice for longevity and wind resistance. Flat-roof systems (TPO, PVC, modified bitumen) have their own pricing structure. We break these down in the material comparison section below.What happens if structural issues are found during a roof replacement?
During a reroof, contractors sometimes discover structural issues that were hidden under the old roof — compromised trusses, inadequate roof-to-wall connections, missing or insufficient hurricane straps, or framing that does not meet current wind-load requirements. Addressing these issues adds cost, but ignoring them creates a roof that is not properly connected to the structure beneath it. Because Bigfoot is a licensed general contractor — not just a roofing contractor — we can handle structural modifications, hurricane strap installation, and roof-to-wall connection upgrades in-house. Many roofing-only companies cannot. If they discover a structural problem, you may need to hire a separate contractor, coordinate schedules, and manage the gap between the two scopes yourself.Do I need a permit for a roof replacement in Florida?
A legal roof replacement in Florida requires a permit. Permit fees vary by county — typically $150–$800+ depending on the municipality and project scope. Inspections are part of the process. In Miami-Dade’s HVHZ, additional product-approval documentation and engineering requirements apply. Any contractor who offers to skip permits is not saving you money — they are creating a liability that can affect your insurance, your resale value, and your ability to pass a future inspection.Does attic ventilation affect roofing cost?
Proper attic ventilation affects both roof longevity and energy efficiency. If your existing ventilation is inadequate, adding or upgrading ridge vents, soffit vents, or powered ventilation adds cost — but it also helps your new roof last longer and reduces cooling costs in South Florida’s heat.| Factor | Typical Cost Impact | Why It Matters |
|---|---|---|
| Larger roof area | Direct — more material & labor | Measured in “roofing squares” (100 sq ft each) |
| Complex roof design | +10–25% | Valleys, hips, dormers, skylights add labor & flashing |
| Steep pitch (≥ 7:12) | +10–20% | Safety equipment, slower installation |
| Multiple tear-off layers | +$1–$3/sq ft per extra layer | More labor, heavier dumpster loads |
| Decking repairs / replacement | +$2–$5+/sq ft (affected areas) | Rotted or delaminated decking must be replaced |
| Enhanced underlayment | +$0.50–$2/sq ft over basic felt | Self-adhered/peel-and-stick for storm protection |
| HVHZ location (Miami-Dade) | +10–20% over non-HVHZ areas | Stricter product approvals, sealed deck, enhanced fastening |
| Structural / hurricane strap work | $500–$5,000+ depending on scope | Roof-to-wall connections, truss repairs |
| Premium material choice | 2–4× the cost of basic shingles | Tile, metal, and designer shingles cost more |
| Difficult access / staging | +5–15% | Narrow lots, landscaping, multi-story homes |
| Ventilation upgrades | $300–$2,000+ | Ridge vents, soffit vents, powered ventilation |
What Keeps Roof Replacement Costs Lower?
Not every factor pushes the price up. Some characteristics of your home and project can keep costs more manageable:- Simple roof geometry — A basic hip or gable roof with few penetrations, no valleys, and no dormers is faster and more efficient to install.
- Low to moderate pitch — Walkable pitches (under 7:12) require less specialized equipment and allow faster, safer work.
- Single-layer tear-off — Removing one layer of existing roofing is less labor-intensive than removing two or more.
- Sound decking — If your roof decking is in good condition, there are no unexpected replacement costs.
- Easy access — Ground-level loading, wide driveways, and no major obstructions make material delivery and debris removal more efficient.
- Standard material selection — Choosing quality architectural shingles from a major manufacturer rather than premium tile or metal keeps material cost lower.
- Non-HVHZ location — Homes in parts of Broward and Palm Beach County outside the HVHZ may have slightly lower code-driven costs than those in Miami-Dade’s hurricane zone, though all of South Florida still faces stringent wind requirements.
Why Do Some Roofing Companies Charge More Than Others?
A higher price does not automatically mean a better roof — but it often reflects real differences in what is included:- Proper licensing and insurance — General liability, workers’ compensation, and proper Florida contractor licensing cost money. Companies that carry full coverage pass that cost along, but they also protect you from liability if something goes wrong on your property.
- Code-compliant installation — Meeting Florida Building Code requirements (especially in the HVHZ) takes time, specific products, and trained crews. Shortcuts save money but create risk.
- Better materials and manufacturer systems — Installing a complete manufacturer system costs more than mixing bargain components. But it is often the only way to qualify for the manufacturer’s full system warranty.
- In-house structural capability — Contractors like Bigfoot who can handle structural issues, hurricane straps, and related modifications in-house invest in broader licensing, training, and field capability.
- Permitting and inspections done properly — Pulling permits, scheduling inspections, and managing the documentation costs time and administrative overhead.
- Cleanup, disposal, and job-site management — Proper debris removal, magnetic nail sweeps, landscape protection, and dumpster management are part of a professional operation.
Why Does One Roofing Quote Come In So Much Lower Than the Others?
When you get three or four roofing quotes and one comes in significantly lower, it is worth understanding why. Common reasons include:- Scope omissions — The quote may not include underlayment upgrades, drip edge, proper flashing, ventilation, or decking repairs.
- No permit — Skipping the permit saves the contractor time and money but exposes you to code violations, insurance problems, and difficulty selling your home.
- Substandard materials — Using the cheapest available products or mixing components from different manufacturers to avoid system-warranty requirements.
- Uninsured or underlicensed crews — Contractors who use uninsured subcontractors or workers without proper training reduce their costs — and shift the risk to you.
- No structural awareness — A roofing-only contractor who lacks a general contractor license may not even evaluate structural conditions.
- Change-order model — Some companies bid low intentionally, knowing they will add charges once the job starts.
Where Does Bigfoot Fall in the South Florida Roofing Market?
Bigfoot Windows & Roofing is not the cheapest roofing company in South Florida. We are also not the most expensive. We typically fall in the mid-to-upper-mid range of the local market. That reflects the fact that our proposals include:- Full Florida Building Code compliance, including HVHZ requirements where applicable
- Quality materials installed as a complete manufacturer system whenever possible
- Permits, inspections, and proper documentation
- Licensed general contractor capability for structural issues, hurricane straps, and code-driven modifications
- Transparent scope — what you see in the proposal is what the project includes
- Full insurance coverage (general liability and workers’ compensation)
- Project management and communication throughout the job
What’s the Difference Between a Good, Better, and Best Roof in South Florida?
| Category | Good | Better | Best |
|---|---|---|---|
| Estimated Range | $12,000–$16,000 | $16,000–$22,000 | $22,000–$30,000+ |
| Shingle Quality | 3-tab or basic architectural | Mid-grade architectural | Premium / designer architectural |
| Underlayment | Code minimum (synthetic felt) | Enhanced synthetic | Full self-adhered / peel-and-stick |
| Warranty | Limited manufacturer warranty | Standard system warranty | Extended system warranty (50-yr lifetime) |
| Ventilation | Existing ventilation reused | Evaluated and improved | Fully optimized ventilation system |
| Structural Scope | Decking repairs only as needed | Decking + hurricane straps if needed | Full structural assessment included |
| Expected Lifespan | 12–18 years | 18–25 years | 25–30+ years |
| Bigfoot Typically Installs | — | ✓ Yes | ✓ Yes |
Ranges are illustrative for shingle systems on a typical 2,000 sq ft home in South Florida. Tile, metal, and flat-roof systems have different ranges. Actual pricing depends on your specific roof.
Shingle, Tile, Metal, or Flat: Which Roof Is Right for Your South Florida Home?
South Florida homeowners typically choose from four main roofing categories. Each has distinct advantages, trade-offs, and pricing characteristics. Architectural asphalt shingles are the most affordable option. Concrete and clay tile cost substantially more but last significantly longer. Standing-seam metal is the premium choice for longevity and wind resistance. Flat-roof systems (TPO, PVC, modified bitumen) serve low-slope sections and commercial applications.| Feature | Asphalt Shingle | Concrete / Clay Tile | Standing-Seam Metal | Flat (TPO/PVC/Mod-Bit) |
|---|---|---|---|---|
| Cost per Sq Ft (Installed) | $5–$9 | $8–$21 | $12–$23 | $6–$14 |
| Typical Total (2,000 Sq Ft) | $12,000–$22,000 | $18,000–$42,000 | $25,000–$50,000+ | $12,000–$28,000 |
| Expected Lifespan (FL) | 12–25 years | 30–50+ years | 40–70 years | 15–30 years |
| Wind Resistance | 110–130 mph (rated) | 125–150+ mph | 140–180+ mph | Varies by system |
| Maintenance | Low-moderate | Moderate (broken tiles) | Very low | Moderate (seams, coatings) |
| Insurance Impact | Standard | May qualify for credits | Often qualifies for credits | Varies |
| Best For | Budget-conscious, standard homes | Long-term value, FL aesthetic | Maximum durability & wind resistance | Low-slope / commercial sections |
Pricing ranges reflect 2025–2026 South Florida market data. Lifespan assumes proper installation and maintenance.
Is a More Expensive Roof Actually Cheaper Over Time?
The initial price of a roof replacement is the number most homeowners focus on. But the smarter question is: what will this roof cost me per year of useful life? A roof that costs $14,000 but lasts 15 years costs you roughly $933 per year. A roof that costs $20,000 but lasts 25 years costs $800 per year. And a tile or metal roof at $35,000 that lasts 40+ years can cost under $875 per year — with fewer repairs, better insurance positioning, and stronger storm protection along the way.| Scenario | Initial Cost | Expected Life | Est. Cost Per Year | Re-Roofs in 50 Years |
|---|---|---|---|---|
| Budget shingle (basic install) | $14,000 | ~15 years | ~$933/yr | 3–4 times |
| Quality shingle (full system) | $20,000 | ~25 years | ~$800/yr | 2 times |
| Concrete tile (quality install) | $28,000 | ~40 years | ~$700/yr | 1–2 times |
| Standing-seam metal | $38,000 | ~50 years | ~$760/yr | 1 time |
What Hidden Roofing Costs Should South Florida Homeowners Watch Out For?
- Decking replacement — Rotted or damaged plywood may not be visible until tear-off. A good contractor will give you a per-sheet or per-square-foot price for decking repairs.
- Code-driven upgrades — Florida’s “25% rule” may require bringing the entire roof system up to current code when more than 25% of your roof is replaced within a 12-month period.
- Structural discoveries — Compromised trusses, inadequate roof-to-wall connections, or insufficient hurricane straps found during tear-off require remediation.
- Change orders from low-bid contractors — Some companies bid low knowing they will add charges for items that should have been included from the start.
- Permit fees and re-inspection costs — Budget for permit fees. If work does not pass inspection, correction and re-inspection costs follow.
- Dumpster and disposal overages — Tile and multi-layer roofs generate heavier debris. Some contractors estimate disposal costs conservatively and add overages later.
- Insurance deductible confusion — You are responsible for your deductible. Contractors who imply they will “cover” the deductible are doing something both illegal and a red flag.
- HOA requirements — Some communities require specific materials, colors, or manufacturer lines.
Why Does Bigfoot Publish Roofing Prices When Most Contractors Don’t?
Most roofing companies in South Florida do not publish pricing information. We publish pricing ranges anyway because we believe:- Informed homeowners make better decisions. If you understand what a roof replacement realistically costs in South Florida, you can spot bids that are suspiciously low and bids that are inflated.
- Transparency builds trust. We would rather have you arrive at an estimate appointment already understanding the general ballpark than feel ambushed by a number you weren’t prepared for.
- It filters for fit. If your budget and expectations align with the kind of work we do, we are probably a good fit.
- It raises the bar. When one company is transparent about what things cost and why, it encourages the rest of the market to be more honest too.
Is Bigfoot Windows & Roofing the Right Fit for You?
| Bigfoot Is Usually a Strong Fit If You… | Bigfoot May Not Be the Best Fit If You… |
|---|---|
| Want a contractor who explains the process and helps you make informed decisions | Just want the lowest number — period |
| Value code-compliant, permitted, inspected work | Prefer to skip permits or minimize code-related scope |
| Want one contractor who can handle roofing, structural, and related scopes | Are comfortable coordinating multiple specialty contractors yourself |
| Care about storm readiness and long-term roof performance | Only care about the roof lasting long enough to sell the house |
| Appreciate transparency in pricing and scope | Prefer high-pressure negotiation dynamics |
| Are considering windows, doors, or other exterior work alongside roofing | Need a very specific niche scope that falls outside our capabilities |
Can You Finance a Roof Replacement in South Florida?
A new roof is a significant investment. Bigfoot works with third-party financing partners to offer payment plans that allow homeowners to spread the cost over time.| Project Cost | Term | Est. Monthly Payment* | Notes |
|---|---|---|---|
| $15,000 | 60 months | ~$290–$330 | Standard credit approval |
| $22,000 | 84 months | ~$320–$380 | Standard credit approval |
| $35,000 | 120 months | ~$370–$450 | Strong credit, longer term |
| $18,000 | 12 months | ~$1,500 | Same-as-cash / 0% promo (if available) |
*Monthly payment estimates assume standard APR ranges and are for illustration only. Actual rates, terms, and approval depend on creditworthiness and lender terms.
How Much Does a Roof Replacement Cost for Different Home Types in South Florida?
| Home / Roof Description | Material | Typical Range |
|---|---|---|
| 1,500 sq ft ranch, simple hip, standard pitch | Architectural shingle | $10,000–$16,000 |
| 2,200 sq ft two-story, moderate complexity | Architectural shingle | $16,000–$24,000 |
| 2,000 sq ft, HVHZ zone (Miami-Dade) | Concrete tile | $22,000–$38,000 |
| 2,500 sq ft estate home, high complexity | Clay tile | $35,000–$55,000+ |
| 1,800 sq ft, simple design, good access | Standing-seam metal | $25,000–$42,000 |
| 1,200 sq ft flat-roof section (commercial/mixed) | TPO / PVC | $8,000–$18,000 |
All ranges are estimated and assume standard conditions. Get a free estimate for your specific home.
Does Roof Replacement Cost More in Miami-Dade Than in Broward or Palm Beach?
Yes. While the same roofing materials are available across South Florida, several county-level factors affect pricing:- Miami-Dade (HVHZ) — The High Velocity Hurricane Zone requires specific product approvals (Miami-Dade NOA), enhanced fastening patterns, sealed roof decks, and stricter inspection protocols. Miami-Dade projects are generally the highest-priced in South Florida.
- Broward County — Parts of Broward fall within or adjacent to the HVHZ, while other areas follow standard Florida Building Code requirements. Pricing typically falls between Miami-Dade and Palm Beach levels.
- Palm Beach County — Generally follows standard FBC requirements without the additional HVHZ layer. Pricing can be slightly lower on a comparable project, though Palm Beach has its own permit fee structures and HOA-driven specifications.
How Much Does a New Roof Cost by City and Neighborhood in South Florida?
Pricing for the same roof can vary by 10–20% depending on your specific city or neighborhood. Factors include local permit fees, proximity to the coast (wind exposure and insurance requirements), typical home size and age in the area, and contractor availability. The table below shows directional ranges for a standard 2,000 sq ft home with architectural shingles — the most common project type — across the cities Bigfoot serves most frequently.
| City / Neighborhood | County | HVHZ Zone | Typical Range | Notes |
|---|---|---|---|---|
| Miami / Miami Beach | Miami-Dade | ✓ Yes | $16,000–$26,000 | Full HVHZ requirements, NOA products required, sealed deck |
| Coral Gables | Miami-Dade | ✓ Yes | $17,000–$28,000 | Many older Mediterranean-style homes, tile roofs common, strict HOA requirements |
| Pinecrest | Miami-Dade | ✓ Yes | $18,000–$30,000 | Larger homes average, tile and metal popular, high-end finishes typical |
| Kendall | Miami-Dade | ✓ Yes | $15,000–$24,000 | Mix of shingle and tile, suburban tract homes common, mid-range market |
| Doral | Miami-Dade | ✓ Yes | $15,000–$23,000 | Many newer builds, good access typically, shingle dominant |
| Hialeah | Miami-Dade | ✓ Yes | $14,000–$22,000 | Dense neighborhoods, access can be challenging, older housing stock |
| Aventura | Miami-Dade | ✓ Yes | $17,000–$27,000 | Coastal exposure premium, high-rise condos excluded (SFH only) |
| Homestead / South Miami | Miami-Dade | ✓ Yes | $13,000–$21,000 | Lower price point area, competitive contractor market |
| Fort Lauderdale | Broward | Partial | $14,000–$23,000 | Coastal areas under stricter wind requirements, inland more standard FBC |
| Hollywood / Hallandale | Broward | Partial | $14,000–$22,000 | Coastal strip under HVHZ rules, western areas standard FBC |
| Pembroke Pines / Miramar | Broward | No | $13,000–$21,000 | Standard FBC, planned communities, good access, competitive pricing |
| Weston / Davie | Broward | No | $13,000–$20,000 | Newer suburban development, HOA communities, generally favorable conditions |
| Boca Raton | Palm Beach | No | $13,000–$22,000 | Strong HOA presence, upscale communities, tile popular, good access |
| Boynton Beach / Delray Beach | Palm Beach | No | $12,000–$20,000 | Standard FBC, active adult communities common, competitive market |
| West Palm Beach / Palm Beach Gardens | Palm Beach | No | $13,000–$22,000 | Mix of older and newer construction, standard FBC requirements |
Ranges are for a typical 2,000 sq ft home with architectural shingles under standard conditions. Tile, metal, or flat roof systems, larger homes, steep pitch, complex design, or structural needs will move pricing above these ranges. HVHZ “Partial” in Broward means coastal strip only — check with your contractor. Request a free estimate for your specific address.
Not sure which zone your home falls in? When you request a free estimate, Bigfoot will confirm your code zone, permit jurisdiction, and any HOA requirements before providing a proposal — so there are no surprises on scope or pricing.
Frequently Asked Questions About Roofing Pricing in South Florida
Why does Bigfoot show roofing pricing when many roofers do not?
We believe informed homeowners make better decisions. Publishing directional pricing ranges helps you understand what a roof replacement realistically costs, compare bids more effectively, and determine whether we are a good fit before either of us invests time in a site visit. The ranges on this page are not quotes — they are honest market guidance.
Are the prices on this page exact or just estimated ranges?
They are estimated ranges based on 2025–2026 South Florida market conditions. Every roof is different — size, pitch, complexity, material, decking condition, code requirements, and structural needs all affect the final price. The only way to get an accurate number for your home is through an on-site inspection and a detailed proposal.
Why can two roofs with similar square footage have very different prices?
Square footage is only one variable. Roof complexity (valleys, hips, dormers), pitch, material selection, decking condition, underlayment choice, code zone (HVHZ vs. non-HVHZ), structural needs, access difficulty, and ventilation requirements all affect pricing. Two 2,000-square-foot roofs can easily differ by $10,000 or more.
Why do some reroof quotes look dramatically cheaper than others?
Common reasons include scope omissions, skipping permits, using substandard materials, employing uninsured labor, or using a low-bid/change-order model where extras are added after the contract is signed. A significantly lower bid deserves closer scrutiny — ask what is and is not included.
Who is a good fit for Bigfoot Windows & Roofing?
Homeowners who want a licensed general contractor that can handle roofing, structural modifications, and related scopes in-house. Homeowners who value code-compliant, permitted, quality work and want transparent pricing and guidance throughout the process.
Can Bigfoot help if structural issues are discovered during the project?
Yes. Bigfoot is a licensed general contractor in Florida — not just a roofing contractor. We can handle structural modifications, hurricane strap installation, roof-to-wall connection upgrades, and truss repairs in-house.
What hidden roofing costs should I watch out for?
The most common hidden costs include decking replacement, code-driven upgrades triggered by the 25% rule, structural repairs, change orders from low-bid contractors, permit fees, disposal overages on heavy roofs, and HOA-required material changes.
Does pricing include permits and code-related requirements?
Bigfoot’s proposals include permitting and code-compliant installation as standard. We never offer to skip permits. Permit fees themselves are a pass-through cost set by your local municipality and are itemized in your proposal.
Do you offer financing?
Yes. Bigfoot works with third-party financing partners to offer payment plans for qualified homeowners. Terms, rates, and approval depend on the lender and your credit profile.
Does roofing pricing vary in Miami-Dade, Broward, and Palm Beach?
Yes. Miami-Dade’s HVHZ requirements generally make projects there the most expensive. Broward falls in between depending on proximity to the HVHZ. Palm Beach County typically follows standard Florida Building Code requirements without the HVHZ layer.
Get Your Roof Replacement Estimate
Every roof is different. The only way to know what your specific project will cost is through an on-site inspection and a detailed proposal — both at no cost and no obligation.
Request a Free Roof Inspection & EstimateOr call us directly: (786) 886-2088
Sources
- Florida Building Code, 8th Edition — floridabuilding.org
- FBC Residential, Chapter 9: Roof Assemblies — ICC/FBC
- National Roofing Contractors Association (NRCA) — nrca.net (2025 Roofing Manual)
- Insurance Institute for Business & Home Safety (IBHS) — ibhs.org
- FORTIFIED Home Program (IBHS) — fortifiedhome.org
- Federal Emergency Management Agency (FEMA) — fema.gov
- Energy Star (U.S. Department of Energy / EPA) — energystar.gov
- Fixr.com — Roof Replacement Cost in Florida
- Modernize — Average Roof Replacement Cost Florida
- Florida Statutes §553.844 — Roof Covering Replacement Requirements (25% Rule)
- ASCE 7-22 — Minimum Design Loads for Buildings (wind load standards referenced by FBC)
